Products
Visual quality
Finnforest ThermoWood® is produced from European Redwood (Pinus Sylvestris).The raw material is specially selected and sawn from live knotted logs.
Product profiles
Types of cladding
A shiplap profile is most appropriate for horizontal cladding as the slope shoulder will effectively channel water away from the
up stand.Tapered profile is also designed for horizontal cladding.The lower edge is chamfered to direct water away from
cladding. Also PMV can be used for horizontal cladding. Horizontal tongued and grooved boards should always be installed
tongue uppermost. A 2mm clearance gap should always be incorporated between the boards to allow possible expansion. For vertical applications most appropriate profiles are Channel Cladding and PMV.
Horizontal or vertical applications for PMV.
Vertical applications only for Channel Cladding.
Horizontal applications only for Shiplap and Tapered cladding. |
 |
Standard Profiles
Finnforest ThermoWood© is available in a variety of finished
profiles or as a treated sawn maeterial in sizes up to a maximum
of 50 x 150mm.
|
25mm x 125mm T&G Shiplap
(smooth or textured) |
|
|
|
25mm
x 125mm PMV Cladding
(smooth or textured) |
|
|
|
21mm
x 92mm Battening/Cornering (2 sides
tetxtured, 2 sides smooth) |
|
|
|
32mm
x 42mm Battening/Cornering (2 sides
textured, 2 sides smooth) |
|
|
|
42mm
x 42mm Battening/Cornering (2 sides
textured, 2 sides smooth) |
|
|
|
|
25mm
x 125mm Channel Cladding
(textured) |
|
|
|
25mm
x 150mm Tapered Cladding
(textured) |
|
|
|
